NeXoft007
New Member
- Joined
- May 10, 2017
- Messages
- 1,680
- Likes
- 13,509
I am talking about DRDO VSHORADS project.
DRDO, PSU and Private Defence Sector News
- Thread starter Sridhar
- Start date
Nope.
Helina is going through a drastic change in its propulsion/guidance system.....now fitted with thrust vectoring jet vanes.
Technically the tests are now at ground based 'captive trials'.
Navy is the one needed it urgently.
The requirement for CLGM has always been it to hit low flying helos. I wouldn't be surprised if that requirement/feature is available in MPATGM also.
Yes.
But modern day QRSAMs that accompany armored corps are also becoming vertically launched.
Prashant12
New Member
- Joined
- Aug 9, 2014
- Messages
- 3,027
- Likes
- 15,002
Interview | Secretary, department of defence R&D and chairman, Defence Research and Development Organisation, Dr G. Satheesh Reddy
Let’s begin with the big news of the year, the anti-satellite test (A-Sat), which the DRDO successfully carried out in March 2019. How would you sum it up?
It was a major technological achievement for the nation. Necessary technologies were already developed as a part of our missile development programmes and ballistic missile defence programmes; but it was required to be customised and integrated together to achieve the desired outcome. Though the building blocks were put in place some time back, the activities of the mission for demonstration of the technological capability were initiated only after the clearance by Prime Minister in late 2016.
Confidentiality was a major challenge for development of a programme of this magnitude, involving multiple laboratories and agencies, with technical complexities. It was also required to conduct the tests at the earliest. A lot of planning was involved from conceptualisation of the mission through development to interception demonstration within two years, ensuring that it is kept confidential. The short time taken by DRDO to migrate from concept to capability demonstration indicates the maturity of technologies, dedication, willingness and capability of DRDO fraternity to accept technological challenges for its time-bound realisation.
We were able to hit the satellite directly with the precision of a few centimetres. The altitude was deliberately kept low, about 250-300km, to avoid the long-term effects of the hit, like the scattering of the debris in the higher orbit. In terms of capability, we can reach beyond 1,000km. Since most of the satellites are in low earth orbit, this capability is adequate as of now. Of course, there are some satellites at medium altitude too, but once we have demonstrated this capability, we can always enhance it by increasing the propulsive power in the vehicle.
Are you working on enhancing that?
No, we are not planning to enhance it as all the technology requirements for the requisite capability have already been established. Having achieved the desired objectives, this programme has been successfully concluded.
It is also important to note that such tests cannot be done repeatedly.
The government established a task force on Artificial Intelligence (AI) last year as part of its initiative Innovations for Defence Excellence (iDEX) that was launched during DefExpo 2018. Since then both Bharat Electronics Ltd and Hindustan Aeronautics Ltd have announced their programmes pertaining to AI, robotics and swarm technologies. What is DRDO’s role in this? Is it a mere coordinator or is it guiding the research?
iDEX is a nice initiative by department of defence production (DDP). DRDO, being the only agency involved with design and development of defence systems, is pursuing a lot of research in this area. DRDO has been encouraging and providing technological and other support to academic institutions, like IITs and industries, both public and private sectors, through various platforms and will continue to support them.
Are you also looking at some kind of collaboration with friendly foreign nations who are doing advanced research in this area?
We have been working with several countries including the United States, Russia, United Kingdom, France and Israel through joint working groups on technology. We have identified several futuristic technologies for joint research in areas like nano technologies, nano sensors, deep learning etc. However, we are still to have any specific collaboration or agreement.
We are conscious of the fact that technologies of the future need to be developed within the country to avoid perpetual dependence on other countries. DRDO has set up Young Scientist Labs for concerted research efforts in these advanced technology domains. In addition to continued efforts at our own labs, we are supporting start-ups in a big way. The role and importance of our academic institutes cannot be understated in providing ‘blue skies research’ for such crucial technologies.
Do you have a separate corpus for this?
The fund allocated to us is for all technology domains and as such we do not need to create a separate corpus for this.
Do you find enough interest among the services for AI-enabled weapons?
Yes, the services have been showing a lot of interest in AI-based weapon technologies. In fact, a number of systems are being developed based on their requirements.
Given that AI is such a vast field and the services would want everything, from basic technologies for command and control as well as advanced weapons. Where are you putting the focus?
We are concentrating on both — basic technologies as well as advanced applications. Control on technologies is crucial. Our labs are working on many products with AI-based technologies. We have also set-up a Young Scientist Lab in this critical technology domain. In addition, we are encouraging start-ups to come up with technologies, systems and products with AI. At the same time, we are working in tandem with academic institutions also on basic technologies.
Do you envisage some joint development projects with friendly countries in the future?
Yes, we may have joint development projects with friendly countries for technologies and systems of mutual interest. Joint working groups have been already established for this.
What kind of work are we doing in the field of hypersonic missiles?
We have recently conducted a hypersonic technology demonstrator test. It was a successful launch and we got a lot of data, which will be very useful for our future tests. We are currently working on hypersonic engines and hypersonic materials. We have undertaken projects for enhancing our capabilities in the areas of aerodynamics, aero-thermal effects, material sciences etc. for use in hypersonic missiles.
What timeline do you envisage for the development of the prototype of a hypersonic missile?
Developmental activities in this area are being undertaken by the different labs. I anticipate that a flight demonstration of hypersonic missile should be ready after five years.
What is the update on Nirbhay cruise missile? What percentage of the missile is indigenous?
Nirbhay is a very successful programme. We have successfully developed and flight-tested the long-range subsonic cruise missile. Six tests have been conducted to validate all the mission objectives and requirements as of today.
I would say close to 70 per cent of the missile is indigenous. We didn’t take any help from anyone in the design and development of this missile, except for buying certain off-the-shelf components from abroad. Imported engine was utilised in the initial tests; however indigenous engine has been developed in parallel, which would be used in the production version of the missile. Major technologies like actuators, Inertial Navigation Satellite System, etc. used in the missile system have been developed indigenously.
Can Nirbhay be inducted into service?
Yes, it can be. The developmental trials are completed for the present land-based configuration of the missile system and the capability has been established. We are discussing its operationalisation with the Services for other variants like sea-based and air-launched versions.
Are you looking at the possibility of making this missile intelligent?
Improvement in developed product or system capabilities is a continuous process for an R&D organisation and we are no exception.
What is the update on Prahaar ballistic missile?
Prahaar is a surface to surface missile. The mobile launch platform will carry multiple missiles, which can have different kind of warheads meant for different targets and can be fired in salvo mode in all directions covering the entire azimuth plane. Development trials of Prahaar have already been conducted.
While DRDO has a full range of unmanned aerial systems, there doesn’t seem to be any programme to develop unmanned combat aerial vehicles (UCAV). What is the reason for this?
In the unarmed UAV category, we have the Rustom family. Rustom 1 is fully developed. Its trials have been concluded. Rustom 2, a medium altitude long endurance (MALE) UAV, is in the advanced stage of development. As far as UCAV is concerned, we don’t have any sanctioned programme as on date; however, we have undertaken development of technologies required for realisation of UCAV.
The armed forces are inclined to procure more and more precision guided munitions. We already have Harpy and now we are going to procure Harop too. What is DRDO doing in the realm of smart, precision weapons?
The purchase of Harpy and Harop is based on the present requirements of the services. A lot of work is going on in DRDO, along with academia and industry in this area. Two premier laboratories of DRDO are working in the area of precision weapons.
What kind of work are you doing in anti-radiation systems and anti-airfield weapons?
Both the systems are quite distinct from one another. Anti-radiation systems are for a very specific purpose and the necessary intelligence to target radiating systems is built into the system. We have a number of on-going projects for the development of anti-radiation systems. Anti-airfield weapons system has already been developed and is undergoing trials; development trials are likely to be completed by the end of this year. We shall continue to work on this system to further refine the technologies involved. All of this is designed and developed entirely indigenously.
What is the status of the ballistic missile defence programme?
We have developed and demonstrated ballistic missile defence systems, both with exo-atmosphere and endo-atmosphere interceptors. With exo-interceptor, we have achieved the altitude range of up to 120-140km, through both real and simulated tests. We have adequate radars and sensors to meet the present requirements. The development of Phase-I of the programme, meant for up to intermediate range missiles, is complete.
But why is it not deployed yet?
Our mandate is to design, develop and demonstrate the capability of the systems. We support the lead system integrators or the production agencies for production of the quantity required. When, where and how to deploy a system is a government decision. We are ready to implement the decision as and when taken.
So, what have been accomplished in phase-I?
As I’ve already mentioned, both exo and endo interceptor capabilities have been successfully demonstrated. I would like to add here that India is one of the few countries in the world to successfully pursue the BMD programme. We have taken significant strides in this domain. We have also demonstrated kinetic kill and all the necessary technologies needed for this have been developed indigenously.
Since the airspace division is roughly about 100 km, if you are able to do your endo-atmosphere interception at a very high altitude (which according to reports was only 45 km), then you can perhaps kill hostile hypersonic missiles too which travel at this altitude?
The hypersonic BMD is a different technology domain. The way one develops the ballistic missile defence is different from what is needed for hypersonic missile defence. The hypersonic missile can be intercepted at different altitudes. A limited capability is being built in AD-1 interceptor to engage hypersonic glide vehicles.
Is it correct to say that for the endo-interception we are looking at an altitude of about 45 km?
We have the capability to engage a target at different altitudes.
Has work commenced on phase-2?
Yes, we have already started work on Phase-2 and it should be ready for demonstration in about two to three years’ time.
DRDO has been looking to collaborate with a technology partner for a jet engine and was in talks with Safran Aircraft Engine. What is the update on that? Will you continue to work on the Kaveri engine or develop a new one?
The Kaveri engine, as a technology, is developed. The power of the engine, within the present constraints, is not sufficient for the current requirements of Light Combat Aircraft (LCA). We have a roadmap for aircraft development in the country, which also requires development of high-power engines suitable for these aircrafts. For this, we are looking for partners who can join hands with us in the development of high-power jet engine. I will not name any particular company right now because we are still at a discussion stage.
What is the update on the Air Independent Propulsion (AIP) system? Are you looking for some hand-holding in this programme?
We are developing the AIP system completely indigenously. We have the capability to do this on our own and we are confident that we will be able to do this successfully on our own. We don’t need any hand-holding for this.
When will you be ready to show it to the navy?
I am confident that we will be able to demonstrate it to the navy by the end of this year.
What is the update on your Next-Gen anti-tank missile system?
We have developed a number of variants of anti-tank missiles as per the requirements of the services. User trials of Nag ATGM have been successfully conducted and development trials of Helina, the airborne anti-tank missile, are under progress. We are currently working on MPATGM (man-portable anti-tank guided missile) programme. Five demonstration trials have already been completed and we would be able to offer it for user trials soon. We have now demonstrated the capability to indigenously develop best of its class ATGMs, which can be produced by Indian industry.
What is the progress on Tejas II?
Tejas II is progressing well. The design phase has been completed. As far as the engine is concerned, the user is satisfied with the present one used and so we will go with the same. For the Indian Navy, we are working on a separate programme as the requirements are different. The design phase for Mark II Navy is over and it will certainly meet all their requirements.
Will there be substantial difference between Tejas II and Naval Mark II?
These are different aircrafts based on the different requirements of the users.
In the early Nineties, Dr APJ Abdul Kalam had mentioned that the DRDO was working on a milli metric wave (MMW) seeker for the Nag ATGM. Since the Nag programme is over now, are you still working on MMW seeker?
We have been working on the MMW-based seeker very seriously. Today, the seeker is developed and we are working on an anti-tank missile with MMW seeker. This is a separate programme, approved by the government. We have been working on it for the last couple of years. The prototype will be ready by the end of this year.
What is the project called?
Let us wait for the first demonstration trial.
As DRDO chief, what are your priorities, in the short and the medium term?
I have advised my lab directors to focus on three categories based on timelines. The first category is futuristic research. Being an R&D organisation, we need to work on futuristic research, which is applied research supported by basic research by the academia. This is essential for any country to progress. The second category is of current technologies, which we need to work upon for the next five years, for development of weapons, systems and platforms. The third category comprises on-going programmes.
Based on this, we have drawn a very explicit roadmap for all our laboratories. This lays down targets for the next two years, two to five years and five to 10 years respectively. All the laboratories are working to meet the targets within the given time frame.
Will nano technology be part of your AI system?
Nano technology is a natural evolution and would increasingly be a part of, what we refer to as, hardware for any system. AI-based systems also would not be an exception.
You have mentioned IIT-Delhi. Which other educational institutions are you working with?
We have centres of excellence at IIT-Chennai, IIT-Mumbai, Jadavpur University, Bharathiar University of Coimbatore and Indian Institute of Science, Bangalore. In addition to these, we are working with 150 other academic institutions. Depending upon their core strength and our requirements, we fund developmental research in the areas of high energy materials, propulsion technology etc. in these institutes.
How many prototypes have you made based on the research done in the academia?
We have a very fruitful association with the academia for several decades now. A number of prototypes have been made based on the research that emanates from theses institutes.
One of the factors that have stymied the development of Indian defence industry is the inability to export. What steps have been taken to not only encourage, but promote exports?
The government has come out with several policies to promote exports. We are creating awareness of DRDO developed products and systems by showcasing them in international defence and aero shows. Keen interests have been shown by many countries for different systems. We will be supporting the industry with technologies to enhance their export competitiveness.
What is DRDO doing in the sphere of cyber warfare?
Space and cyber has become the fourth and fifth dimension of warfare. DRDO has been working in the domain of cyber defence closely with all stakeholders to ensure safety and security of our defence systems and equipment.
What is the update on AESA radar?
The AESA radar is integrated with the Light Combat Aircraft. The test and evaluation are going on at the moment. We are confident that AESA radar would be fully proven by the next year and would be ready for induction on Tejas Mk 1A.
Is there anything else that you would like to speak about?
On the technology front, we are very seriously working on AMCA (Advanced Medium Combat Aircraft). The design efforts have started, product development has begun and we are regularly interacting with the Indian Air Force (IAF) on this.
We are now integrating with the Indian industry in a big way. We would be engaging the industry as the development-cum-production partner from the beginning of the project to ensure seamless transfer of technology and offer systems from first of production model for trials to cut down the development cycle time. Para 72 of DPP 2016 facilitates this. We want to strengthen our manufacturing base by enabling Indian industry through their involvement as partners and not limited to assembly line job.
http://forceindia.net/interview/sec...development-organisation-dr-g-satheesh-reddy/
Let’s begin with the big news of the year, the anti-satellite test (A-Sat), which the DRDO successfully carried out in March 2019. How would you sum it up?
It was a major technological achievement for the nation. Necessary technologies were already developed as a part of our missile development programmes and ballistic missile defence programmes; but it was required to be customised and integrated together to achieve the desired outcome. Though the building blocks were put in place some time back, the activities of the mission for demonstration of the technological capability were initiated only after the clearance by Prime Minister in late 2016.
Confidentiality was a major challenge for development of a programme of this magnitude, involving multiple laboratories and agencies, with technical complexities. It was also required to conduct the tests at the earliest. A lot of planning was involved from conceptualisation of the mission through development to interception demonstration within two years, ensuring that it is kept confidential. The short time taken by DRDO to migrate from concept to capability demonstration indicates the maturity of technologies, dedication, willingness and capability of DRDO fraternity to accept technological challenges for its time-bound realisation.
We were able to hit the satellite directly with the precision of a few centimetres. The altitude was deliberately kept low, about 250-300km, to avoid the long-term effects of the hit, like the scattering of the debris in the higher orbit. In terms of capability, we can reach beyond 1,000km. Since most of the satellites are in low earth orbit, this capability is adequate as of now. Of course, there are some satellites at medium altitude too, but once we have demonstrated this capability, we can always enhance it by increasing the propulsive power in the vehicle.
Are you working on enhancing that?
No, we are not planning to enhance it as all the technology requirements for the requisite capability have already been established. Having achieved the desired objectives, this programme has been successfully concluded.
It is also important to note that such tests cannot be done repeatedly.
The government established a task force on Artificial Intelligence (AI) last year as part of its initiative Innovations for Defence Excellence (iDEX) that was launched during DefExpo 2018. Since then both Bharat Electronics Ltd and Hindustan Aeronautics Ltd have announced their programmes pertaining to AI, robotics and swarm technologies. What is DRDO’s role in this? Is it a mere coordinator or is it guiding the research?
iDEX is a nice initiative by department of defence production (DDP). DRDO, being the only agency involved with design and development of defence systems, is pursuing a lot of research in this area. DRDO has been encouraging and providing technological and other support to academic institutions, like IITs and industries, both public and private sectors, through various platforms and will continue to support them.
Are you also looking at some kind of collaboration with friendly foreign nations who are doing advanced research in this area?
We have been working with several countries including the United States, Russia, United Kingdom, France and Israel through joint working groups on technology. We have identified several futuristic technologies for joint research in areas like nano technologies, nano sensors, deep learning etc. However, we are still to have any specific collaboration or agreement.
We are conscious of the fact that technologies of the future need to be developed within the country to avoid perpetual dependence on other countries. DRDO has set up Young Scientist Labs for concerted research efforts in these advanced technology domains. In addition to continued efforts at our own labs, we are supporting start-ups in a big way. The role and importance of our academic institutes cannot be understated in providing ‘blue skies research’ for such crucial technologies.
Do you have a separate corpus for this?
The fund allocated to us is for all technology domains and as such we do not need to create a separate corpus for this.
Do you find enough interest among the services for AI-enabled weapons?
Yes, the services have been showing a lot of interest in AI-based weapon technologies. In fact, a number of systems are being developed based on their requirements.
Given that AI is such a vast field and the services would want everything, from basic technologies for command and control as well as advanced weapons. Where are you putting the focus?
We are concentrating on both — basic technologies as well as advanced applications. Control on technologies is crucial. Our labs are working on many products with AI-based technologies. We have also set-up a Young Scientist Lab in this critical technology domain. In addition, we are encouraging start-ups to come up with technologies, systems and products with AI. At the same time, we are working in tandem with academic institutions also on basic technologies.
Do you envisage some joint development projects with friendly countries in the future?
Yes, we may have joint development projects with friendly countries for technologies and systems of mutual interest. Joint working groups have been already established for this.
What kind of work are we doing in the field of hypersonic missiles?
We have recently conducted a hypersonic technology demonstrator test. It was a successful launch and we got a lot of data, which will be very useful for our future tests. We are currently working on hypersonic engines and hypersonic materials. We have undertaken projects for enhancing our capabilities in the areas of aerodynamics, aero-thermal effects, material sciences etc. for use in hypersonic missiles.
What timeline do you envisage for the development of the prototype of a hypersonic missile?
Developmental activities in this area are being undertaken by the different labs. I anticipate that a flight demonstration of hypersonic missile should be ready after five years.
What is the update on Nirbhay cruise missile? What percentage of the missile is indigenous?
Nirbhay is a very successful programme. We have successfully developed and flight-tested the long-range subsonic cruise missile. Six tests have been conducted to validate all the mission objectives and requirements as of today.
I would say close to 70 per cent of the missile is indigenous. We didn’t take any help from anyone in the design and development of this missile, except for buying certain off-the-shelf components from abroad. Imported engine was utilised in the initial tests; however indigenous engine has been developed in parallel, which would be used in the production version of the missile. Major technologies like actuators, Inertial Navigation Satellite System, etc. used in the missile system have been developed indigenously.
Can Nirbhay be inducted into service?
Yes, it can be. The developmental trials are completed for the present land-based configuration of the missile system and the capability has been established. We are discussing its operationalisation with the Services for other variants like sea-based and air-launched versions.
Are you looking at the possibility of making this missile intelligent?
Improvement in developed product or system capabilities is a continuous process for an R&D organisation and we are no exception.
What is the update on Prahaar ballistic missile?
Prahaar is a surface to surface missile. The mobile launch platform will carry multiple missiles, which can have different kind of warheads meant for different targets and can be fired in salvo mode in all directions covering the entire azimuth plane. Development trials of Prahaar have already been conducted.
While DRDO has a full range of unmanned aerial systems, there doesn’t seem to be any programme to develop unmanned combat aerial vehicles (UCAV). What is the reason for this?
In the unarmed UAV category, we have the Rustom family. Rustom 1 is fully developed. Its trials have been concluded. Rustom 2, a medium altitude long endurance (MALE) UAV, is in the advanced stage of development. As far as UCAV is concerned, we don’t have any sanctioned programme as on date; however, we have undertaken development of technologies required for realisation of UCAV.
The armed forces are inclined to procure more and more precision guided munitions. We already have Harpy and now we are going to procure Harop too. What is DRDO doing in the realm of smart, precision weapons?
The purchase of Harpy and Harop is based on the present requirements of the services. A lot of work is going on in DRDO, along with academia and industry in this area. Two premier laboratories of DRDO are working in the area of precision weapons.
What kind of work are you doing in anti-radiation systems and anti-airfield weapons?
Both the systems are quite distinct from one another. Anti-radiation systems are for a very specific purpose and the necessary intelligence to target radiating systems is built into the system. We have a number of on-going projects for the development of anti-radiation systems. Anti-airfield weapons system has already been developed and is undergoing trials; development trials are likely to be completed by the end of this year. We shall continue to work on this system to further refine the technologies involved. All of this is designed and developed entirely indigenously.
What is the status of the ballistic missile defence programme?
We have developed and demonstrated ballistic missile defence systems, both with exo-atmosphere and endo-atmosphere interceptors. With exo-interceptor, we have achieved the altitude range of up to 120-140km, through both real and simulated tests. We have adequate radars and sensors to meet the present requirements. The development of Phase-I of the programme, meant for up to intermediate range missiles, is complete.
But why is it not deployed yet?
Our mandate is to design, develop and demonstrate the capability of the systems. We support the lead system integrators or the production agencies for production of the quantity required. When, where and how to deploy a system is a government decision. We are ready to implement the decision as and when taken.
So, what have been accomplished in phase-I?
As I’ve already mentioned, both exo and endo interceptor capabilities have been successfully demonstrated. I would like to add here that India is one of the few countries in the world to successfully pursue the BMD programme. We have taken significant strides in this domain. We have also demonstrated kinetic kill and all the necessary technologies needed for this have been developed indigenously.
Since the airspace division is roughly about 100 km, if you are able to do your endo-atmosphere interception at a very high altitude (which according to reports was only 45 km), then you can perhaps kill hostile hypersonic missiles too which travel at this altitude?
The hypersonic BMD is a different technology domain. The way one develops the ballistic missile defence is different from what is needed for hypersonic missile defence. The hypersonic missile can be intercepted at different altitudes. A limited capability is being built in AD-1 interceptor to engage hypersonic glide vehicles.
Is it correct to say that for the endo-interception we are looking at an altitude of about 45 km?
We have the capability to engage a target at different altitudes.
Has work commenced on phase-2?
Yes, we have already started work on Phase-2 and it should be ready for demonstration in about two to three years’ time.
DRDO has been looking to collaborate with a technology partner for a jet engine and was in talks with Safran Aircraft Engine. What is the update on that? Will you continue to work on the Kaveri engine or develop a new one?
The Kaveri engine, as a technology, is developed. The power of the engine, within the present constraints, is not sufficient for the current requirements of Light Combat Aircraft (LCA). We have a roadmap for aircraft development in the country, which also requires development of high-power engines suitable for these aircrafts. For this, we are looking for partners who can join hands with us in the development of high-power jet engine. I will not name any particular company right now because we are still at a discussion stage.
What is the update on the Air Independent Propulsion (AIP) system? Are you looking for some hand-holding in this programme?
We are developing the AIP system completely indigenously. We have the capability to do this on our own and we are confident that we will be able to do this successfully on our own. We don’t need any hand-holding for this.
When will you be ready to show it to the navy?
I am confident that we will be able to demonstrate it to the navy by the end of this year.
What is the update on your Next-Gen anti-tank missile system?
We have developed a number of variants of anti-tank missiles as per the requirements of the services. User trials of Nag ATGM have been successfully conducted and development trials of Helina, the airborne anti-tank missile, are under progress. We are currently working on MPATGM (man-portable anti-tank guided missile) programme. Five demonstration trials have already been completed and we would be able to offer it for user trials soon. We have now demonstrated the capability to indigenously develop best of its class ATGMs, which can be produced by Indian industry.
What is the progress on Tejas II?
Tejas II is progressing well. The design phase has been completed. As far as the engine is concerned, the user is satisfied with the present one used and so we will go with the same. For the Indian Navy, we are working on a separate programme as the requirements are different. The design phase for Mark II Navy is over and it will certainly meet all their requirements.
Will there be substantial difference between Tejas II and Naval Mark II?
These are different aircrafts based on the different requirements of the users.
In the early Nineties, Dr APJ Abdul Kalam had mentioned that the DRDO was working on a milli metric wave (MMW) seeker for the Nag ATGM. Since the Nag programme is over now, are you still working on MMW seeker?
We have been working on the MMW-based seeker very seriously. Today, the seeker is developed and we are working on an anti-tank missile with MMW seeker. This is a separate programme, approved by the government. We have been working on it for the last couple of years. The prototype will be ready by the end of this year.
What is the project called?
Let us wait for the first demonstration trial.
As DRDO chief, what are your priorities, in the short and the medium term?
I have advised my lab directors to focus on three categories based on timelines. The first category is futuristic research. Being an R&D organisation, we need to work on futuristic research, which is applied research supported by basic research by the academia. This is essential for any country to progress. The second category is of current technologies, which we need to work upon for the next five years, for development of weapons, systems and platforms. The third category comprises on-going programmes.
Based on this, we have drawn a very explicit roadmap for all our laboratories. This lays down targets for the next two years, two to five years and five to 10 years respectively. All the laboratories are working to meet the targets within the given time frame.
Will nano technology be part of your AI system?
Nano technology is a natural evolution and would increasingly be a part of, what we refer to as, hardware for any system. AI-based systems also would not be an exception.
You have mentioned IIT-Delhi. Which other educational institutions are you working with?
We have centres of excellence at IIT-Chennai, IIT-Mumbai, Jadavpur University, Bharathiar University of Coimbatore and Indian Institute of Science, Bangalore. In addition to these, we are working with 150 other academic institutions. Depending upon their core strength and our requirements, we fund developmental research in the areas of high energy materials, propulsion technology etc. in these institutes.
How many prototypes have you made based on the research done in the academia?
We have a very fruitful association with the academia for several decades now. A number of prototypes have been made based on the research that emanates from theses institutes.
One of the factors that have stymied the development of Indian defence industry is the inability to export. What steps have been taken to not only encourage, but promote exports?
The government has come out with several policies to promote exports. We are creating awareness of DRDO developed products and systems by showcasing them in international defence and aero shows. Keen interests have been shown by many countries for different systems. We will be supporting the industry with technologies to enhance their export competitiveness.
What is DRDO doing in the sphere of cyber warfare?
Space and cyber has become the fourth and fifth dimension of warfare. DRDO has been working in the domain of cyber defence closely with all stakeholders to ensure safety and security of our defence systems and equipment.
What is the update on AESA radar?
The AESA radar is integrated with the Light Combat Aircraft. The test and evaluation are going on at the moment. We are confident that AESA radar would be fully proven by the next year and would be ready for induction on Tejas Mk 1A.
Is there anything else that you would like to speak about?
On the technology front, we are very seriously working on AMCA (Advanced Medium Combat Aircraft). The design efforts have started, product development has begun and we are regularly interacting with the Indian Air Force (IAF) on this.
We are now integrating with the Indian industry in a big way. We would be engaging the industry as the development-cum-production partner from the beginning of the project to ensure seamless transfer of technology and offer systems from first of production model for trials to cut down the development cycle time. Para 72 of DPP 2016 facilitates this. We want to strengthen our manufacturing base by enabling Indian industry through their involvement as partners and not limited to assembly line job.
http://forceindia.net/interview/sec...development-organisation-dr-g-satheesh-reddy/
- Joined
- Dec 16, 2018
- Messages
- 4,110
- Likes
- 24,160
In its largest ever export order, OFB to supply 50,000 Bofors shells to UAE
idrw.org .Read more at India No 1 Defence News Website https://idrw.org/in-its-largest-ever-export-order-ofb-to-supply-50000-bofors-shells-to-uae/ .
idrw.org .Read more at India No 1 Defence News Website https://idrw.org/in-its-largest-ever-export-order-ofb-to-supply-50000-bofors-shells-to-uae/ .
- Joined
- Aug 23, 2017
- Messages
- 5,706
- Likes
- 21,817
It has very little operational value.....in terms of payload capacity or flight endurance! As such Israeli drones were bought!
- Joined
- Aug 23, 2017
- Messages
- 5,706
- Likes
- 21,817
Last edited:
NeXoft007
New Member
- Joined
- May 10, 2017
- Messages
- 1,680
- Likes
- 13,509
Barak 8
...................................
- Joined
- Aug 23, 2017
- Messages
- 5,706
- Likes
- 21,817
- Joined
- Aug 23, 2017
- Messages
- 5,706
- Likes
- 21,817
@NeXoft007
A rough comparison between elta 2052.... And Uttam aesa
What is uttams range
Again ..... yesterday thear was report that ..Uttam will be ready next year for mk1a...your input on this
A rough comparison between elta 2052.... And Uttam aesa
What is uttams range
Again ..... yesterday thear was report that ..Uttam will be ready next year for mk1a...your input on this
- Joined
- Dec 16, 2018
- Messages
- 4,110
- Likes
- 24,160
The NIJ Level-III+ version of the Bhabha Kavach BPJ developed by BARC, Trombay & set to be produced by Ordnance Equipment Factory, Kanpur has reportedly got an overwhelming reception from both the Army & the Central Armed Police Forces. Large orders likely.
The NIJ Level III+ Bhabha Kavach's armour is made of boron-carbide backed with CNT-polymer composite.
BARC says that this version affords protection against SLR, INSAS, AK-47 hard-steel core bullet rounds, with 'trauma less than 15mm', while weighing around 6.5 kg.
The NIJ Level III+ Bhabha Kavach's armour is made of boron-carbide backed with CNT-polymer composite.
BARC says that this version affords protection against SLR, INSAS, AK-47 hard-steel core bullet rounds, with 'trauma less than 15mm', while weighing around 6.5 kg.
Vijyes
New Member
- Joined
- Dec 2, 2016
- Messages
- 1,978
- Likes
- 1,723
Major portion of imported weapons indigenised under 'Make in India' programme: BDL chief
A majority portion of the weapon systems procured from other countries has been indigenised as part of 'Make in India' programme, Chief Managing Director of the Bharat Dynamics Limited (BDL) Commodore Siddhartha Mishra said on Saturday.
Speaking on the occasion of the Golden Jubilee celebrations of BDL, Mishra said, "We have indigenised 75 to 90 per cent weapon systems procured from France, Russia and Italy. We have signed many MoUs with private partners in defence sector, which is a progressive step."
Explaining further, Mishra said that the production of sophisticated weapons such as SS1b1 and MRSAM in the country has helped India in saving foreign currency to a large extent. During the celebrations, Minister of Defence handed over the Medium Range Surface-to-Missile (MRSAM) to the Indian Air Force (IAF). The Vice Chief of Air Staff Air Marshal RKS Bhadauria received it on behalf of the IAF.
"Taking forward the Make in India, BDL has made changes in the producers for producing defence equipment with the help of private industries under Make II procedure. With this private industries can also help in indigenising by producing prototypes of essential defence equipment," Mishra added.
Meanwhile, during the event, Defence Minister Rajnath Singh unveiled a statue of late President APJ Abdul Kalam at BDL's office premises in Kanchanbagh.
He also inaugurated a rainwater harvesting facility at the upcoming unit of BDL in Ibrahimpatnam and a 5MW solar power plant.
In the event, DRDO chief, G Satheesh Reddy was also present.
A majority portion of the weapon systems procured from other countries has been indigenised as part of 'Make in India' programme, Chief Managing Director of the Bharat Dynamics Limited (BDL) Commodore Siddhartha Mishra said on Saturday.
Speaking on the occasion of the Golden Jubilee celebrations of BDL, Mishra said, "We have indigenised 75 to 90 per cent weapon systems procured from France, Russia and Italy. We have signed many MoUs with private partners in defence sector, which is a progressive step."
Explaining further, Mishra said that the production of sophisticated weapons such as SS1b1 and MRSAM in the country has helped India in saving foreign currency to a large extent. During the celebrations, Minister of Defence handed over the Medium Range Surface-to-Missile (MRSAM) to the Indian Air Force (IAF). The Vice Chief of Air Staff Air Marshal RKS Bhadauria received it on behalf of the IAF.
"Taking forward the Make in India, BDL has made changes in the producers for producing defence equipment with the help of private industries under Make II procedure. With this private industries can also help in indigenising by producing prototypes of essential defence equipment," Mishra added.
Meanwhile, during the event, Defence Minister Rajnath Singh unveiled a statue of late President APJ Abdul Kalam at BDL's office premises in Kanchanbagh.
He also inaugurated a rainwater harvesting facility at the upcoming unit of BDL in Ibrahimpatnam and a 5MW solar power plant.
In the event, DRDO chief, G Satheesh Reddy was also present.
abingdonboy
New Member
- Joined
- Sep 13, 2010
- Messages
- 8,084
- Likes
- 33,803
Who’s fault is that? FM not giving funds and MOD babus/services not interested in ordering or making DRDO run around in circles.
It’s the same old story again and again. Asking for the best of the best from India but happy to go on shopping trips abroad.
I’m firmly of the view that the entire procurement system needs to be revamped. When a requirement is drafted by the services an independent body within MOD needs to asses whether there is a suitable product within DRDO if not next stage is if such a system can be developed within the next 2-3 years if not then and only then can the deal go to a global bid but then also Indian companies should be given preference.
MOD should also set a target that by 2025 all major deals over (say) $300m cannot be pursued through a global route at all. They all have to go to Indian industry.
A firm target needs to be set or else these sellouts in MOD and service HQs will keep up this import circus in perpetuity.
abingdonboy
New Member
- Joined
- Sep 13, 2010
- Messages
- 8,084
- Likes
- 33,803
No doubt the plates are world class but I wish they would come up with a better plate carrier design. This one is SO freaking outdated and unergonomic it looks like it was designed in the 1960s.
It seems 100s of thousands of these are going to be issued around India and that’s a bit of a tragedy, protection is great but they are woefully outdated looking.
abingdonboy
New Member
- Joined
- Sep 13, 2010
- Messages
- 8,084
- Likes
- 33,803
Hmmm, for the army and navy but not airforce?
And I’m really liking what I’m seeing, increasingly DRDO is ahead of the game and working towards future requirements that few (if any) people have. Hope services get out of their backwards thinking and actually start working with DRDO for their futire needs at conceptualisation stage.
