SavageKing456
Senior Member
- Joined
- Apr 14, 2020
- Messages
- 3,078
- Likes
- 18,152
![India Country flag](https://defenceforumindia.com/misc/flags/shiny/32/India.png)
Proof of the pudding is in eating it...A large number of helina and dhruvastra are going to be ordered
Note- alh rudra can carry 6 atgms(single luncher in outer and twin luncher in inner.....it's my assumption from the last helina test)
Sorry sir just asking is it due to hopium or truthA large number of helina and dhruvastra are going to be ordered
Note- alh rudra can carry 6 atgms(single luncher in outer and twin luncher in inner.....it's my assumption from the last helina test)
OkSorry sir just asking is it due to hopium or truth
No about ordersOk
Check drdo helina lunch video
And order of helina is from a friend
Derated 110 kn class .India plans to produce several hundred Mk1A, MWF, TEDBF, AMCA and possibly ORCA fighters. The Kaveri project has not resulted in an engine suitable for use in the Tejas, so all designs except AMCA Mk2 are planned to be powered by GE404 or GE414 engines giving the following thrusts:
GE404 53.9 kN (12,100 lbf) thrust dry, 90 kN (20,200 lbf) with afterburner
GE414 58.5 kN (13,200 lbf) thrust dry, 98 kN (22,000 lbf) with afterburner
GE engines are subject to the US government approving their export to India. Approval can be suspended or terminated for political or for economic reasons. This puts India in a precarious position.
How can India best find alternatives to using American engines? Current proposed possibilities are:
Collaboration with SAFRAN/RR to complete development of the Kaveri engine
Collaboration with RR to develop an engine to power AMCA
With an increase in wet thrust Kaveri would be suitable for Tejas and Tejas Mk1A but what is the likelihood of it being available before all Mk1A aircraft ordered by IAF have been delivered? If production versions of the engine are too late to use in Tejas Mk1A production, is it worth finishing Kaveri development?
A joint RR/Indian 110kN engine would be suitable for use in AMCA Mk2 and with Mk2 not scheduled for production until the 2030's, it could be available in good time for Mk2 production.
Should India bite the bullet and invest very heavily in securing the freedom to manufacture and further develop (having IP rights) these engines? What about substitution of GE414 with an Indian engine - should a power boosted Kaveri be developed or a derated version of the proposed new 110kN engine be used?
"Should India bit e the bullet to secure freedom .... "India plans to produce several hundred Mk1A, MWF, TEDBF, AMCA and possibly ORCA fighters. The Kaveri project has not resulted in an engine suitable for use in the Tejas, so all designs except AMCA Mk2 are planned to be powered by GE404 or GE414 engines giving the following thrusts:
GE404 53.9 kN (12,100 lbf) thrust dry, 90 kN (20,200 lbf) with afterburner
GE414 58.5 kN (13,200 lbf) thrust dry, 98 kN (22,000 lbf) with afterburner
GE engines are subject to the US government approving their export to India. Approval can be suspended or terminated for political or for economic reasons. This puts India in a precarious position.
How can India best find alternatives to using American engines? Current proposed possibilities are:
Collaboration with SAFRAN/RR to complete development of the Kaveri engine
Collaboration with RR to develop an engine to power AMCA
With an increase in wet thrust Kaveri would be suitable for Tejas and Tejas Mk1A but what is the likelihood of it being available before all Mk1A aircraft ordered by IAF have been delivered? If production versions of the engine are too late to use in Tejas Mk1A production, is it worth finishing Kaveri development?
A joint RR/Indian 110kN engine would be suitable for use in AMCA Mk2 and with Mk2 not scheduled for production until the 2030's, it could be available in good time for Mk2 production.
Should India bite the bullet and invest very heavily in securing the freedom to manufacture and further develop (having IP rights) these engines? What about substitution of GE414 with an Indian engine - should a power boosted Kaveri be developed or a derated version of the proposed new 110kN engine be used?
That's from a sourceNo about orders
Ford class carrier is 330m long. New DD is about 310. Also we need more such dry docks.
Enough for 65,000 tn career INS vishal.Ford class carrier is 330m long. New DD is about 310. Also we need more such dry docks.
oh my… that must be a pretty heavy lifting job description/profile..Enough for 65,000 tn career.
pipavav RNaval has 600m+ dry dock + gloiath cranes...yet all that is sitting empty and rotting away because of incompetent ownersFord class carrier is 330m long. New DD is about 310. Also we need more such dry docks.
this is just a drawing.
The good ol' "trust me boi".this is just a drawing.