INSAS Rifle, LMG & Carbine

Kunal Biswas

Member of the Year 2011
New Member
Joined
May 26, 2010
Messages
31,122
Likes
41,041
The Metal Sheets are thicker but lighter than previous once due to new metallurgy, Gives less noise and increase safety

How did they reduce the sound? What design changes reduced the overall sound of the rifle?
 

sayareakd

New Member
Joined
Feb 17, 2009
Messages
17,734
Likes
18,953
Country flag
Re: ACOG Alternatives ( Legal )

Sir, Absolutely, This is also i mentuoned :

On Pro side :

1. Cheaper
2. Flexible in mid ranges so does Close combats..
3. Easily available..

But on con side :

1. Putting both scope also need more rail space..
2. Maintenance of both sights and there mounts..
3. Weight of both is more than a single piece..
Sir enough space on INSAS for P rail.



red space can have this rail









regarding blue area, we can have extended P rail on existing rail of INSAS.
 

sayareakd

New Member
Joined
Feb 17, 2009
Messages
17,734
Likes
18,953
Country flag
Re: ACOG Alternatives ( Legal )

Kunal sir we can have separate thread for list of accessories for INSAS, I think INSAS will be in service for another 10 years so it wont be bad idea to have list of accessories, must have for INSAS to pin it up.
 

AVERAGE INDIAN

EXORCIST
New Member
Joined
Sep 22, 2012
Messages
3,332
Likes
5,426
Country flag
i always wonder though we build good weapons but with crude appearance why the guys in OFB do something about it
 

Kunal Biswas

Member of the Year 2011
New Member
Joined
May 26, 2010
Messages
31,122
Likes
41,041
Re: ACOG Alternatives ( Legal )

Back to Work =====================>>

I have a Simpler Solution in My Mind, Which will reduce the work load by 40% >>


FN-FNC is still in use, Upgraded in time..
^^ From above, My Idea takes shape >>



From last 2 months, this INSAS is haunting me in my dreams.. :)
@sayareakd sir..


Sir enough space on INSAS for P rail.

red space can have this rail

regarding blue area, we can have extended P rail on existing rail of INSAS.
 
Last edited by a moderator:

mattster

Respected Member
New Member
Joined
May 30, 2009
Messages
1,171
Likes
870
Country flag
In India.....small arms manufacturing is done by the state-owned company.

Almost all the small arms manufacturers in the Western world are private or public companies that have share-holders, etc to answer to.
They compete in the open market - so the quality and the fit and finish and reliabilty have to be top notch.

Until private industry in India takes over small arms manufacturing - you wont see the kind of fit and finish that you see from the Berreta, H&K, Glock, Colt, etc.
 

Kunal Biswas

Member of the Year 2011
New Member
Joined
May 26, 2010
Messages
31,122
Likes
41,041
For Comparison, This is not a this vs that ..

Have a look at the thread, these are talked over and over, Don't hijack it..

New thread for what? MSMC is a part of the INSAS family. This is the right thread for it.
 

Shaitan

Zandu Balm all day
New Member
Joined
Aug 3, 2010
Messages
4,654
Likes
8,370
Country flag
In India.....small arms manufacturing is done by the state-owned company.

Almost all the small arms manufacturers in the Western world are private or public companies that have share-holders, etc to answer to.
They compete in the open market - so the quality and the fit and finish and reliabilty have to be top notch.

Until private industry in India takes over small arms manufacturing - you wont see the kind of fit and finish that you see from the Berreta, H&K, Glock, Colt, etc.
I would be nice to see companies like L&T, etc. manufacture the small arms at least, but this isnt going to happen in the near future probably.
 

sayareakd

New Member
Joined
Feb 17, 2009
Messages
17,734
Likes
18,953
Country flag
Re: ACOG Alternatives ( Legal )

Back to Work =====================>>

I have a Simpler Solution in My Mind, Which will reduce the work load by 40% >>





^^ From above, My Idea takes shape >>



From last 2 months, this INSAS is haunting me in my dreams.. :)
@sayareakd sir..
well sir this is haunting me for last two years :thumb:
 
Last edited by a moderator:

sayareakd

New Member
Joined
Feb 17, 2009
Messages
17,734
Likes
18,953
Country flag
Re: ACOG Alternatives ( Legal )

Back to Work =====================>>

I have a Simpler Solution in My Mind, Which will reduce the work load by 40% >>




^^ From above, My Idea takes shape >>



From last 2 months, this INSAS is haunting me in my dreams.. :)
@sayareakd sir..
Kunal sir these type of strips of P rail are easy to get and they wont carry much weight.



but it wont be that strong compare to three side quad rail guard. Advantage of existing lower hand guard is that it provide protection against the heating of barrel, if you drill this strip in it will give some stability, still regular three side is much better. Polymer wont provide that much stability if drilled into.
 
Last edited by a moderator:

sayareakd

New Member
Joined
Feb 17, 2009
Messages
17,734
Likes
18,953
Country flag
Kunal sir i have no idea about cleaning of INSAS but i think something like this survival kit will help in field.









all these things add weight to rifle, but it gives the soldier big moral booster, as he knows that he is better armed and prepare to take on enemy.
 
Last edited by a moderator:

acetophenol

New Member
Joined
Jul 17, 2011
Messages
292
Likes
242
Country flag
In India.....small arms manufacturing is done by the state-owned company.

Almost all the small arms manufacturers in the Western world are private or public companies that have share-holders, etc to answer to.
They compete in the open market - so the quality and the fit and finish and reliabilty have to be top notch.

Until private industry in India takes over small arms manufacturing - you wont see the kind of fit and finish that you see from the Berreta, H&K, Glock, Colt, etc.
You can't expect much private player participation in India in small arms field,as we are having strict gun laws.
 

Kunal Biswas

Member of the Year 2011
New Member
Joined
May 26, 2010
Messages
31,122
Likes
41,041
Re: ACOG Alternatives ( Legal )

Ture, But this is a faster solution and will cost much lesser and if one does the drill he must make sure it stays for long time.. :)

Once its done, Just mount anything one wish to..

Kunal sir these type of strips of P rail are easy to get and they wont carry much weight.



but it wont be that strong compare to three side quad rail guard. Advantage of existing lower hand guard is that it provide protection against the heating of barrel, if you drill this strip in it will give some stability, still regular three side is much better. Polymer wont provide that much stability if drilled into.
 

Articles

Top