LCA TEJAS MK1 & MK1A: News and Discussion

ARVION

Tihar Jail
Banned
Joined
Jun 19, 2020
Messages
2,735
Likes
5,773
Country flag
Once we fit LCA Tejas with our own indigenous engine it will become the workhorse of IAF
Even the IHI succeed in creating a 3.5 Meter's, .6 meter in diameter and 600 kg XF 5 engine capable of 50kn thrust and we struggle with kaveri for a reason's, infracture's.
 

ARVION

Tihar Jail
Banned
Joined
Jun 19, 2020
Messages
2,735
Likes
5,773
Country flag
TBH given the timeline, a private player would have not only done a better job but at much quicker time and would have produced at much larger quantity.
Still better than the OFB's.
 

WolfPack86

New Member
Joined
Oct 20, 2015
Messages
10,571
Likes
16,993
Country flag
LCA-Tejas Production slips further due to teething issues

If Two months of Lockdown at the LCA-Tejas production facility were not enough to derail the schedule of the production of the FOC configured LCA-Tejas Mk1, poor management of the LCA-Tejas supply chain has come as an additional headache for state-owned Hindustan Aeronautics Limited (HAL) which is in charge of the production of the LCA-Tejas Mk1 is now also facing issues with the first two FOC configured aircraft which already has been assembled. idrw.org was informed that the Indian Air Force (IAF) is facing some Quality issues and but majorly teething issues with the new FOC configured LCA-Tejas Mk1 which are equipped with new equipment due to which delivery of further aircraft has been put on hold till these technical issues are resolved along with supply chain issues which due to pandemic has affected the supply chain mostly coming from the MSME sector which is severely affected due to shortage of manpower. HAL claims it has enough components to assemble 5 more Tejas Mk1, it will still require to identify and see alternatives to few of the supply vendors if they are not able to resume supply of components soon. some imported parts and equipment which were stuck due to International lockdown will resume soon as International partners have resumed work. idrw.org was informed that teething issues were expected as the aircraft are new and are way different when it comes to onboard equipment than the 16 IOC configured LCA-Tejas Mk1 which were manufactured earlier and HAL is confident it will be resolved to the satisfaction of the end-user (IAF) soon but time lost will not be recovered in the process which will make it very difficult for HAL to deliver 8 LCA-Tejas Mk1 for FY 2020-21 as per original delivery schedule.
 

MonaLazy

New Member
Joined
Aug 12, 2019
Messages
1,321
Likes
7,898
issue with air intake?
There is and isn't.



Thakur explains that simple pitot type intake design used on LCA-Tejas is what prevents LCA-Tejas to have engineered speed of 2.0M while to achieve this speeds, LCA air intakes could have to re-done and also employ intakes cones as seen in Mirage-2000 and Mig-21 which moves move in or out of the intakes to maintain the shockwave in its the proper position, ahead of the first stage of the engine and need to be adjusted by the pilot.

Lack of intakes cones in LCA-Tejas means a hassle-free operation for the Pitot but this new phenomenon is not limited to LCA-Tejas alone but many are countries are now limiting Mach speed on many modern fighter jets after intense study and data collected over the years of the max speed at different attitudes as pointed by Thakur, who gives an example how below 22000 feet altitude Mach speed over 1.6 is not possible and a plane flying at Mach 1.8 has the advantage of only 60knot when it is above 28000 feet altitude.
Probably because LCA was India's first stab at a modern 4th generation fighter- they wanted to keep it simple & the intake was designed to be the simple pitot type with little moving parts and that limits its speed to 1.6M.

These days the airplane speed doesn't matter as much as speed, agility & NEZ range of BVRAAM.
 

ARVION

Tihar Jail
Banned
Joined
Jun 19, 2020
Messages
2,735
Likes
5,773
Country flag
There is and isn't.





Probably because LCA was India's first stab at a modern 4th generation fighter- they wanted to keep it simple & the intake was designed to be the simple pitot type with little moving parts and that limits its speed to 1.6M.

These days the airplane speed doesn't matter as much as speed, agility & NEZ range of BVRAAM.
I though minor change's were made to the Air intake's.
 

varun9509

New Member
Joined
Aug 12, 2017
Messages
555
Likes
2,001
Country flag
There is and isn't.





Probably because LCA was India's first stab at a modern 4th generation fighter- they wanted to keep it simple & the intake was designed to be the simple pitot type with little moving parts and that limits its speed to 1.6M.

These days the airplane speed doesn't matter as much as speed, agility & NEZ range of BVRAAM.
Will we change it in Mk1A, Mk2 and ORCA?
 

IndianHawk

New Member
Joined
Sep 24, 2016
Messages
9,058
Likes
37,675
Country flag

@IndianHawk @Bleh is there really an issue with its air intake?
Or import lobby trying real hard?
No issue with intake. It works as designed. Most modern jets don't go beyond 1.6-1.8 Mach. So no necessity for unnecessary complication . And new tech like DSi intake also limits speed . So that's the general direction of it .

Only issues are supply chain disruption as of now.
 

patriots

Defense lover
New Member
Joined
Aug 23, 2017
Messages
5,706
Likes
21,817
Country flag
The teething issues with Tejas foc was normal....
A lots of work going on.....you will see them
Tejas with astra progressing well ...
 

Articles

Top