UAVs and UCAVs

gadeshi

Senior Member
Joined
Jun 19, 2013
Messages
9,223
Likes
6,636
A funny thing - Russian amateur has created Half-Life alien drone UAV:
 

gadeshi

Senior Member
Joined
Jun 19, 2013
Messages
9,223
Likes
6,636
A short documentary about US and NATO drone-connected war crimes:
 

gadeshi

Senior Member
Joined
Jun 19, 2013
Messages
9,223
Likes
6,636
The 927-th Drone Testing and Training Center (Belarus):
 

gadeshi

Senior Member
Joined
Jun 19, 2013
Messages
9,223
Likes
6,636
Sova atmospheric satellite (pseudolite) maiden flight video:
 

Akim

Professional
Joined
Jun 14, 2012
Messages
10,096
Likes
8,536
Country flag
Operational-tactical complex "Gorlica" (collared dove).

 

gadeshi

Senior Member
Joined
Jun 19, 2013
Messages
9,223
Likes
6,636
Operational-tactical complex "Gorlica" (collared dove).

Looks good, let's see it in action.
Can you attached its datasheet here please?

Отправлено с моего XT1080 через Tapatalk
 

Akim

Professional
Joined
Jun 14, 2012
Messages
10,096
Likes
8,536
Country flag
Looks good, let's see it in action.
Can you attached its datasheet here please?

Отправлено с моего XT1080 через Tapatalk
This is a flying model and not a full-fledged UAV.
The maximum speed is 230 km/h
flight altitude - up to 5 km and the flight Duration up to 7 hours.
However, the tactical radius, it is not large - only 80 km,
payload - 50 kg.
Can be equipped with guided missiles (probably RK-3 -2pcs or AL-8 -4 pcs.). But AL-8 long (this is a controllable cumulative version of the S8). Nomenclature of weapons conjectural. The representative of "Antonov" it did not elaborate.

AL-8 in the background.
 

Kunal Biswas

Member of the Year 2011
Ambassador
Joined
May 26, 2010
Messages
31,122
Likes
41,042
HAL Seeking Private Sector Partner to Manufacture its 320 daN turbojet for missiles / drones



HAL intends to design and develop a 320 daN (326 kgf) thrust class jet engine for various applications.The single spool turbo jet engine would have an envelope diameter of 310 mm and length of 740 mm.

It would be capable of operating in altitude range of Sea Level to 8.5 km.The engine would have a SFC of 1.175 kg/daN-h, a starting envelop of 8.5 km to SL @ 0.4 to 0.8M, endurance of 1,000 sec

Physical Parameters and Weight

Length <= 740mm (Excluding LRUs)
Diameter <= 310mm
Dry weight < 44-kg (Excluding LRUs and cartridge Starter)

Initial Requirement
2 engines for Technology Demonstrator (TD)
10 prototype engines for various certifications / qualification trials
5 deliverable engines for limited series production

Private Sector Manufacturing Partnership

HAL on May 31, 2016 released a RFI for 'Selection of an Indian partner to manufacture aero engine in India.'

The due date for submission of a response to the RFI is August 10, 2016

HAL has invited interested Indian partners to undertake the manufacture of the engine by establishing all the required facilities including test rigs and engine test bed. HAL will manufacture 2 technology demonstrators and 3 qualification test units.

In the proposed partnership arrangement, the marketing of end product will be in the scope of HAL.

The current projection is to produce about 12 engines over 2 years time frame after initial development phase. The engine under development is likely to undergo changes during the productionisation. Once the development phase is completed, it is anticipated that the total no of engines required would be around 250 over 5 to 6 year period.

Source : http://thumkar.blogspot.in/2016/07/hal-seeking-private-sector-partner-to.html

========================
========================

It is very speculative now, That we might not see Rustom-2 anytime soon ..

Instead of going for a turbo prop or piston, They might go for this engine ..
 

Kunal Biswas

Member of the Year 2011
Ambassador
Joined
May 26, 2010
Messages
31,122
Likes
41,042


=========================

Hopefully sooner, Design, development, prototype fabrication and qualification testing of Manik engine done..





Manik produces 425 kgf or ~4.25KN thrust

Pictures taken by : @rahulrds1
 

Latest Replies

Global Defence

New threads

Articles

Top