- Jan 10, 2016
Driving into Dynamatic Technologies' production facilities, an hour from central Bengaluru, is a transition from the grey anonymity of an industrial zone into a pleasing green layout of buildings with cheerful canary-yellow facade.
A sprightly, grey-haired man receives me in a foyer. I recognise Ravish Malhotra, the icy-cool test pilot the Air Force had shortlisted to be India's first astronaut. As it turned out, his compatriot, Rakesh Sharma, hurtled into space on a Russian Soyuz spaceship. But, until blast-off, it could have been either.
Dynamatic started out in licence-raj India as a manufacturer of hydraulic pumps. Still in that business, the company's revenue now comes mostly from automotive components built in Chennai and Germany for a range of carmakers, including BMW, Mercedes Benz and Audi. Meanwhile, it moves steadily towards becoming a large fabricator of aerospace components and systems: the gold standard of precision manufacturing.
While the National Democratic Alliance talks up the "Make in India" project as a quick fix for galvanising indigenisation, it has taken Dynamatic thirty years to build this capability.
Today, Dynamatic builds "flap track beam assemblies" for every one of the 54 single-aisle airliners that Airbus assembles each month. If this assembly, critical for an airliner's balance, lift and turn, isn't delivered on time and to precise specifications, the assembly of A-318, A-319, A-320 and A-321 aircraft in France (50 per month) and China (four) would grind to a halt.
Dynamatic is also a growing supplier to Boeing. Starting with an offset-linked order for mission and power cabinets for the Indian Navy's eight Boeing P8-I multi-mission maritime aircraft, Boeing quickly expanded the order to encompass every P8 aircraft being built for the US and Australian navies.
Pleased with what it saw, Boeing then placed orders on Dynamatic for the Chinook CH-47E helicopters that India is buying. The Chinook's main pylon and ramp, which will start being delivered next month, are the most sophisticated aero structures being exported from India.
For the Indian aerospace market, Dynamatic builds one-sixth of the airframe of the Sukhoi-30MKI fighter, shipping the parts to Nashik where Hindustan Aeronautics (HAL) integrates them into the fighter.
When Indo-US defence cooperation needed a co-development showpiece during President Barack Obama's visit to India last January, one of the projects highlighted was a next-generation micro-UAV (unmanned aerial vehicle) called the Cheel. Dynamatic Technologies will co-develop this with the global leader in micro-UAVs, an American firm called AeroVironment.
The change agent
Malhotra escorts me to the boardroom, where Udayant Malhoutra, Dynamatic's 50-year-old chief executive and majority stake owner, offers me coffee. A trim, man with a keen awareness of what is going on around him, Malhoutra joined his father's debt-loaded company, then called Dynamatic Hydraulics, as a 20-year-old. Since taking the helm, his focus on manufacturing "highly engineered products" has transformed its products, vision and fortunes: last year, turnover was a quarter of a billion dollars (Rs 1,629 crore), with a net profit of $11 million (Rs 79 crore).
As he conducts me around the aerospace units, the compulsively hands-on Malhoutra calls practically every worker by name. He explains that Dynamatic's growing success rests on its global production model. Instead of providing foreign vendors with a sweatshop for reducing costs through low-wage labour, Dynamatic has fashioned a multi-national capability based on comparative advantage.
In 2008, Dynamatics bought over Bristol-based, family-owned Oldland. In 2011, it acquired a 630-year-old German automotive components manufacturer, Eisenwerke Erla, gaining access to a world-class foundry and cutting-edge research facilities.
"In fabricating aerospace and high-tech automotive components, each part of us does what it is best at. We machine the most complex parts in Bristol, and ship those to India, where we do the final assembly. Western Europe is the best place for complex, five-axis robotic machining. We use robotic machining facilities there, since labour is expensive, while capital is cheap - just 2 per cent, compared to 12 per cent here. Then we transport those machined components to India, where our strength is artisanal manufacture, and assemble them here. This global delivery model is winning us business against global competition," says Malhoutra.
In three decades, Dynamatic has shifted from manufacturing 3,000 hydraulic pumps a day, to fabricating one aerospace assembly from 3,000 precisely machined sub-components.
Dynamatic carefully cultivates its heritage, even that obtained through buyouts. After buying Oldland, its aerospace brand was changed to Dynamatic-Oldland Aerospace. Eisenwerke Erla too retains its unique brand identity, as a company that dates back to pre-medieval times.
Dynamatic lays emphasis on doing more for customers than just providing manufacturing and assembly capacity. This is highlighted to me at the Bell-407 helicopter cabin assembly unit, which was set up after a $243 million deal in 2013 for building cabins over the succeeding ten years.
I learn that a bevy of Bell Helicopter technicians hovering over the assembly line are overseeing the conversion by Dynamatic of two-dimension paper blueprints that Bell Helicopter provides, into three-dimension computer model that are more precise, and have tighter tolerances than the old paper drawings. Digitising the drawings creates a baseline configuration for greater accuracy. This streamlines manufacture, while also benefiting the customer.
Malhoutra recounts that when Dynamatic first began digitising a drawing, his overseas customer cautioned that this was not part of the contract and would not be paid for. But when the digitisation was complete, it was evident that manufacturing according to the two-dimensional paper blueprint would leave tiny gaps between the different components in the assembly. Earlier, as per twentieth-century manufacturing practice, the tiny gaps between components were filled with shims. But by digitising blueprints, those tiny gaps could be entirely eliminated during manufacture.
Dynamatic is also eyeing the homeland security market, for which it signed a "teaming agreement" in 2013 with AeroVironment to co-develop the Cheel, though there are no orders on hand from India's security forces. Company executives lament the slowness in inducting UAVs, which they point out would have been able to locate the terrorists who attacked Pathankot Air Base last month.
The company's balance sheet, a mostly rising graph, has two notable blips. One, the current year's figures will take a notable dip, with the global slowdown hitting all three lines of the company's business: automotive components, hydraulics and aerospace. Two, a debt burden of over Rs 600 crore, carried over from the purchase of Oldland and Eisenwerke Erla, continues to require expensive servicing.
The chief financial officer, Hanuman Sharma, downplays concerns about the debt, which he says is moderate given the company's size and turnover. He forecasts a credit rating rise over the next two quarters, from BBB Plus at present to A, which will bring down the cost of capital from a peak of 17 per cent to about 13 per cent.
Meanwhile, turnover is set to grow. Flap track beam assemblies for Airbus' long-range airliners, like the A330, will start being shipped shortly. Bell Helicopters, which has traditionally built products in-house, is expected to lean more on Dynamatic.
Space for more
The company has acquired 27 acres of land adjoining the Bangalore International Airport. Here, Dynamatic Aerotropolis will cater for the expansion of all aerospace activities. With its own helipad, control tower and airspace management system, the company hopes to set up an assembly line for light helicopters and UAVs, as it transitions from a Tier-1 assembly supplier to a "prime contractor" that does the lucrative work of systems integration.
Dynamatic is making a major strategic shift from manufacturing hydraulics and automotive components towards aerospace manufacture-a high profit margin, but capital intensive, business. Sharma says aerospace, which makes just 20 per cent of the group's profits currently, will account for 50 per cent in another three years. Meanwhile, automotive parts will drop from 50 per cent today, to about 25 per cent; with hydraulics dropping marginally from the present 30 per cent to about 25 per cent.
From the production lines, we go back to the boardroom for lunch with company executives. This is a simple meal of Subway sandwiches and pizzas, served up by the executives' drivers. "Nobody in the company sits idle. After bringing us here in the morning, the drivers man offices, move documents around, cut vegetables, serve lunch, and then drive us back home in the evening", explains Malhoutra. "We like our employees to command and demand high wages."
Even as Dynamatic grows its order book, moving up the value chain to systems integration - or assembling entire aircraft from assemblies and components supplied by Tier-1 and Tier-2 vendors - is not supported by government policy. The defence ministry's Aatre Task Force has recommended that only companies with annual consolidated turnover of at least Rs 4,000 crore (Rs 40 billion) for each of the last three financial years, and capital assets of Rs 2,000 crore (Rs 20 billion), should be accepted as "strategic partners" to the government in fabricating weapon systems. To unlock the future of Dynamatic Technologies, the defence ministry would need to give credit to proven manufacturing competence rather than just size and turnover.
Dynamatic and the long road to 'Make in India' - Rediff.com Business
Additional reading :
Airbus Appoints India’s Dynamatic As Tier One Supplier | Aerospace News: Aviation International News
Boeing: Boeing India - Dynamatic Technologies produces first Chinook Aerostructures for Boeing