China's Mega machines

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
---------------------------------------------------------- -------------------------------------------------- --------
The world's largest crane - Dalian Heavy Industries 20,000 tons bridge crane
---------------------------------------------------------- -------------------------------------------------- --------
The total project investment: 350 million yuan
Project duration: 2006 - 2008


This sets 20,000 tons overhead crane lifting height of up to 118 meters, which is equivalent to 250 fully loaded train cars to upgrade to a 23-storey upstairs, beam length 129 meters, in order to double-box beam structure, and if this crane recline, to a soccer field in order to put it under.

At 10:00 on April 18, 2008, Yantai Raffles Offshore Engineering Co., Ltd. dock dock doors flood the west side of Pier 3 flags fluttering, the world's largest bridge crane - named "Tarzan" will weight 20,000 tons of barge slowly lifted out of the water, marking the 20,000 tons overhead crane successfully enabled.

This is a starting weight of the world's largest span of the largest lifting height of the largest lifting equipment, but also the world's highest large-scale technical difficulty lifting equipment.

20,000 tons bridge crane from the lifting of Dalian Heavy Industry Group, contracted to, equipment, the overall height of 118 meters, the main beam span of 125 meters; use of high or low double-beam structure, lifting height of 113 meters and 83 meters; this platform sling A total of 12 aircraft winch body, the whole point of a total of 48 cranes, each lifting point lifting capacity of 420 tons, a single rope has reached 4,000 meters.

Maximum lifting weight of up to 20,160 tons, all set in the world.

Can be achieved while improving at the same time lay down, lifting speed of 0.2 meters per minute.

Prior to this, the world's largest of its kind can only be lifting equipment weight lifting more than 7000 tons.


Dalian Heavy Industry Group, has broken through the multi-crane lift points, lifting torque balance, multiple sets of synchronous lifting mechanism control 18 core technical subjects, from, and Yantai Raffles signed a contract to turn-key in just 20 months.

Yantai Raffles Offshore Engineering Co., Ltd. at the beginning of the construction of 20 thousand tons crane has been took over after the 9 semi-submersible drilling platform construction orders, the market in good condition.

Throughout the 20,000 tons bridge crane project engineering, cost 85 million yuan essential part of the concrete base.

In order to assure timely completion of quality and quantity, Yantai Raffles Offshore Engineering Co., Ltd. launched nationwide tender.

Hundreds of well-known construction firms participate in the bidding, through some contention, smoke Construction Group Co., Ltd. Outright.


June 29, 2006, 20,000 tons of concrete pedestal crane project started.
20,000 tons of concrete pedestal crane The project includes construction of four concrete base. Two concrete the base height of 100 meters above ground, the other two a height of 70 meters. Concrete base height of 13.8 meters below ground level, foundation slab thickness of 4 meters to 6 meters. The whole project is the use of goods amounted to 7000 square concrete, steel nearly 10,000 tons.

Most worthy of "pride" is that the project design strength of concrete for the C50, while the Three Gorges Project ship lock, CCTV new site, and other famous works are the concrete strength C40.


Large-scale offshore oil drilling platform, is usually sub-construction law, workers have to assemble at 30 meters above the ground hundreds of equipment modules.

With this platform crane, can be achieved on the ground to install the upper module, once the overall onto the body of the float downward.


As a result, high-altitude operations, dock construction time by 30 percent, and drilling platforms to shorten the construction cycle, an average of six months to achieve the construction of marine engineering technology revolution.

The success of the device production, offshore oil drilling platform will change the traditional way to construct a platform for the construction of each of the time can be saved one million man-hours, shortening the construction cycle of the ship more than 30%, significantly reducing labor costs, improve production efficiency and construction security, our country and the world shipping industry, marine engineering construction of the development of a landmark!
 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
-------------------------------------------------- --------
The world's largest hydraulic machine - CITIC Heavy Industries, 18.5 thousand tons hydraulic press
---------------------------------------------------------- -------------------------------------------------- --------
The total investment: 20 billion yuan
Project duration: 2006 - 2009


On May 22, 2008, CITIC Heavy Industries cast a 520-ton-weight blanket upper beam with 10 furnace of 829.5-ton-weigh refining motlen steel




This hydraulic machine beams is 11.95 meters long , 3.8 meters wide and 4.59 meters high, weighing a total of 520 tons of rough.


This is the world's biggest molten steel conponent cast one at a time .

。 On November 18, 2008, with 250 tons crane lifting the first piece of 116.4-ton-weigh foundation beam and steadily placing it in more than 10 meters deep excavation for the "new heavy machinery," the installation of world's biggest 18.5-thousand-ton-class hydraulic presses and 750-ton-class forging manipulator started.



This hydraulic machine is designed and built to meet the requirement of China's energy, transportation and other areas .

It now promotes china's largest forging capacity from 190 tons to 400 tons.
 

roma

NRI in Europe
Senior Member
Joined
Aug 10, 2009
Messages
3,582
Likes
2,538
Country flag
the name Yantai-RAFFLES - seems to suggest a joint venture with a foreign company , so it isnt an indigenous china effort i guess ?
 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
-------------------------------------------------- --------
The world's largest CNC horizontal lathe - Takeshige DL250-type 5-m heavy-duty horizontal lathe CNC
---------------------------------------------------------- -------------------------------------------------- --------
The total project investment: 1 billion yuan
Project duration: 2006 - 2008







In September 2006, Wuhan Heavy Duty Machine Tool Group Co., Ltd. and CSHI signed contract of a global biggest DL250 international five-meter super-heavy sleeper NC supply contract.

DL250 CNC five-meter super-heavy sleeper is widely used in hydropower, nuclear power, shipbuilding, aerospace, military and other industries. It can machine components such as rollers, steam turbine rotor , Wai belt, generator , turbine spindle, the machine spindle, heavy-duty crankshaft, winches and ship rope tube and so on.

This CNC machine tool has a complete independent intellectual property rights .It is by far the world's largest horizontal size of the super-heavy-duty CNC lathe with a maximum turning diameter, load-bearing, dual-turret dual method group control mode, boring bar vertical movement gantry axis control using a number of technologies will create the world.

This DL250 CNC horizontal machine tools has a bed length of over 50 meters , maximum diameter of 5 meters and the total weight of 1450 tons. It can endure the max pressue of 500 tons and has a maximum machining length of 20 meters. It also has the largest processing diameter knife 4.5 m. Its the total cutting force is 350KN. Its main motor power of is 284KW, rated as the world's largest size of today's ultra-heavy-duty CNC lathe.

At the same time, the super-heavy-duty machine tools machining has a accuracy of 0.006 mm, about one-tenth of a human hair. It can machine cone, surface, step shaft, groove and thread. With different Configuration of accessories, it can be widely used in hydropower, nuclear power, shipbuilding, aerospace, military and other industries.
 

roma

NRI in Europe
Senior Member
Joined
Aug 10, 2009
Messages
3,582
Likes
2,538
Country flag
takashige - sounds japanese Takasago ?
 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
The world's largest membrane-type LNG vessels - maritime super freezer truck
---------------------------------------------------------- -------------------------------------------------- --------
The total investment: 11 billion yuan
Project duration: 2006 - 2009



LNG ship is dedicated to the professional delivery of liquefied natural gas vessels. The LNG ships"Dapeng Sun" can carry 140,000 tons compressed natural gas. If depressed, those natural gases are enough to supply 17 million Shanghaiese for a month.


On April 3, 2008, China's first liquefied natural gas (LNG) ship "Dapeng Sun" was given to its orderer in Shanghai. The LNG was built by Hudong-Zhonghua Shipbuilding (Group) Company Limited. It is the world's largest membrane-type LNG vessel .

The building of "Dapeng Sun" started on December 15, 2004 . it has a length 292 meters and a wideth of 43.35 . Its speed is 19.5 marines. It cost 160 million USD and is even more expensive than a Boeing aircraft.
 

tarunraju

Sanathan Pepe
Mod
Joined
Sep 18, 2009
Messages
9,080
Likes
40,077
Country flag
The shipbuilder made a typo, and painted "Dapeng Moon" on her :)
 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
The world's largest forging hydraulic machine - three Seizo, 10-ton key equipment for the aviation industry
---------------------------------------------------------- -------------------------------------------------- --------
The total investment: 40 billion yuan
Project Duration: 2008 - 2012


super forging hydraulic press is an indispensable and important equipment for machinery manufacturing. It is basic equipment for the manufacturing of aerospace industry . It is also widely used for the manufacturing of other important industrial sectors which also need large forgings, such as the turbine wheel , large gas turbine wheel forgings, all kinds of engine blades, large-scale marine forging parts, forging parts with a large power station, pressure vessel forgings, and so on.

super forging hydraulic press is so important to aerocraft industry that one country can not forge large-scale material and conponent without it.So, without it ,any of the following birds can not be built.



Russia now has the world biggest super forging hydraulic press which is 75000-ton-class.Frenchmen has no such big super forging hydraulic press ,so Frenchmen have to have the land gear molding of A380 made in Russia.


now, most of super forging hydraulic machines are owned by USA,Russia and European. that is why they have most advanced aircraft industry in the world.


China plans to build its first commerical big plane C919 and big miliary transport plane.Chinese current super forging hydraulic machines are not powerful enough to build such big plane.
that is why CHinese are now investing billions of dollars on developing global biggest 80000-ton-class super forging hydraulic machines.

Chinese C919

here are the super forging hydraulic machines Chinese owns now. they are too small to build big plane such as C919 or Boeing 747.

 

Koji

Regular Member
Joined
May 24, 2009
Messages
758
Likes
1
Awesome pics. Really highlights the enormous industrial background one needs to make even simple parts on a bird.
 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
the world's second laser shock processing of production line - a major breakthrough in China's aviation manufacturing technology
--------------------------------------------------------------- -------------------------------------------------- -------------
— The total project investment: ?
Project duration: 2000 - 2008





On November 30, 2008, Chinese first laser shock processing production line was competely in in Xi'an Yanliang National Aviation Hi-tech Industrial Base . The laser shock processing production line was jointly construted by Shui Xian Optoelectronic Technology Development Co., Ltd. and Blue Eagle Aviation Electric Co., Ltd.
Now, CHina is the second country that can construct such advanded processing production lines after USA . Such a laser shock processing production line is indispensible to the manufacturing of 5 G bird such as F22.

 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
The world's biggest and the most precise rolling machine - 5.5 m heavy plate mill made by China First Heavy Industry CO.
----------------------------------------------------------------
The total project investment: 2 billion yuan
Project duration: 2007 - 2008




the monst is 760 ton weigh and has over 100,000 components,200+ meters long.
it is mainly used to roll the large-scale steel for the building of monster tankers and ..super Aircraft carriers..


 

badguy2000

Respected Member
Senior Member
Joined
May 20, 2009
Messages
5,133
Likes
746
Key equipment for the manufacturing of Marine Crankshaft- CNC "Tornado car" made by Qiqihar Heavy Industry Co.
---------------------------------------------------------- -------------------------------------------------- --------
The total Investment: 4000 million yuan
Project duration: 2006 - 2007



---------------------------------------------------------------------
large-scale Marine Crankshafts is the key component of monster tankers and super aircraft carriers.

the engines drive the crankshafts directly,then the crankshafts drives the propellers directly.then the monster tankers or super AC can have the driving force.
the large-scale crankshafts for monster tankers or Super AC

the large-scale propeller of US SUper aircraft carriers


because the large-sale crankshafts for monster tankers and super AC is sooo big that only a few countries can machine it.

To manufactur monster tankers and super AC by itself, CHina has worked out the key machining equipment of such large-scale crankshafts.
 

Latest Replies

Global Defence

New threads

Articles

Top