J11B powered by WS10a

[badguy2000]

 

[sayareakd]

thanks how do we know it has chines engine ??? no official news and data on this.

 

[badguy2000]

thanks how do we know it has chines engine ??? no official news and data on this.

it is perhaps because you depend too much on the blah of Mr. Lethalforce or Vlamdir as your only information resource .

If you surf more serious military websites such as keypublishing or CD, you can easily find the pictures of J11 powed by WS10a everywhere.

in fact, the above pictures are reposted from CD.
According to recent information revealed by one company listed on Shenzhen stock market, the company produced one key alloys for WS10 last year, which are enough to produce 100 WS10a .

the information form Zhuhai also proves that WS10a has been massproduced and entered into service.

 

[sayareakd]

it is perhaps because you depend too much on the blah of Mr. Lethalforce or Vlamdir as your only information resource .

If you surf more serious military websites such as keypublishing or CD, you can easily find the pictures of J11 powed by WS10a everywhere.

in fact, the above pictures are reposted from CD.
According to recent information revealed by one company listed on Shenzhen stock market, the company produced one key alloys for WS10 last year, which are enough to produce 100 WS10a .

the information form Zhuhai also proves that WS10a has been massproduced and entered into service.

BG you and other chines member take it so seriously and dont give answer to what is asked.

what i am saying is any official news or declaration that chines engine is fitted in J10B........... i am not asked for the allow or the blade or the fuel which is made and sold by some company or the turnover or number of employees of the company. Hope that make it clear for you.

 

[LETHALFORCE]

from a Chinese source:

Chinese engineers also thought they had managed to master the manufacturing techniques needed to make a Chinese copy of the Russian AL31F engine. This Chinese copy, the WS10A, was meant for the Chinese J-10 fighter, which entered service two years ago. But the Chinese Air Force was not satisfied with the reliability or performance of the WS10A, and have ordered another hundred AL31Fs from Russia, in order to continue building J-10s. Meanwhile, Russian efforts to build an improved AL31 for their own F-22 competitor, have run into serious problems. Will the Chinese suddenly do better than their tutors?

http://www.chinasecurityblog.com/20...ass-fighter-jet-from-chinesemil-blogspot-com/

 

[badguy2000]

BG you and other chines member take it so seriously and dont give answer to what is asked.

what i am saying is any official news or declaration that chines engine is fitted in J10B........... i am not asked for the allow or the blade or the fuel which is made and sold by some company or the turnover or number of employees of the company. Hope that make it clear for you.

J10b is still not fitted with WS10a yet, because it is a sole-engine jet .
WS10a is still just fitted in doulbe-engined J11B

 

[ahmedsid]

J10b is still not fitted with WS10a yet, because it is a sole-engine jet .
WS10a is still just fitted in doulbe-engined J11B

How do u know its the WS10a from the pics? Its a long shot! Can you please explain?

 

[sayareakd]

How do u know its the WS10a from the pics? Its a long shot! Can you please explain?

ahmed this is what i have asked him

thanks how do we know it has chines engine ??? no official news and data on this.

This is what he said

it is perhaps because you depend too much on the blah of Mr. Lethalforce or Vlamdir as your only information resource .

If you surf more serious military websites such as keypublishing or CD, you can easily find the pictures of J11 powed by WS10a everywhere.

in fact, the above pictures are reposted from CD.
According to recent information revealed by one company listed on Shenzhen stock market, the company produced one key alloys for WS10 last year, which are enough to produce 100 WS10a .

the information form Zhuhai also proves that WS10a has been massproduced and entered into service.

:emot0:

 

[badguy2000]

How do u know its the WS10a from the pics? Its a long shot! Can you please explain?

WS10a's ass is different from AL31's
you can google keypublish....there are enough discussion about it already there.

 

[SATISH]

WS10a's ass is different from AL31's
you can google keypublish....there are enough discussion about it already there.

I tried and except for J-7 Hot Dog everyone thinks that WS 10A is based on the AL 31F core.....

 

[badguy2000]

I tried and except for J-7 Hot Dog everyone thinks that WS 10A is based on the AL 31F core.....

haha,really everyone? pls read more serious military forum such as keypublish and CD....

if WS10a were based on AL31F core, then CMF56 and F101 both would be based on AL31F core too.


WS10a is the cousin of CMF56 and F101...they all are based on the same core .

During 1980s, China and USA were in honeymoon and China got some CMF56 for backup of Boeing civilian planes... China took the opportunity to get the tech of core of CMF56,and started a engine project based on the core,which is WS10a.

CMF56 itself is a civilian variety of F101.both are base on the same core. So, in fact, WS10a, CMF56 and F101 are all based on the same core. the three are cousins.

the blah that WS10a is based on AL31 is completely Bull$hit!

BTW, the fact that WS10a is based on the core of F110 and CMF56 is almost a common sense in CD ,keypublish and Sinodefence....

 

[badguy2000]

well, Xinhua comfirmed that WS10a has been mass-produced and entered into service.
http://news.xinhuanet.com/mil/2010-11/19/c_12792071.htm

it can be looked on as a official comfirm,because Xinhua is CCP's official throat.

However, its thrust is only 12.5 Tones, which is smaller than 13.2 Tones reported before.

 

[badguy2000]

 

[jayz india]

it is perhaps because you depend too much on the blah of Mr. Lethalforce or Vlamdir as your only information resource .

If you surf more serious military websites such as keypublishing or CD, you can easily find the pictures of J11 powed by WS10a everywhere.

in fact, the above pictures are reposted from CD.
According to recent information revealed by one company listed on Shenzhen stock market, the company produced one key alloys for WS10 last year, which are enough to produce 100 WS10a .

the information form Zhuhai also proves that WS10a has been massproduced and entered into service.

really u want us to read in more serious military forum..then what r u doing in this less serious military forum with considerably high no of posts,jst give any official source,if u have claimed a thing then back it up with a source there is no point in saying that go to other forums n google n blah blah,u r experienced enough to understand that,and u should knw that without any source u cannot or should not go on claimint things n ask people to go to other forums,i can post pics of F-22 with indian flags n say that they belong to india without any source,u knw where am i going with this??? again source plz or go back to ur so called more military forum or CD

 

[jayz india]

well, Xinhua comfirmed that WS10a has been mass-produced and entered into service.
http://news.xinhuanet.com/mil/2010-11/19/c_12792071.htm

it can be looked on as a official comfirm,because Xinhua is CCP's official throat.

However, its thrust is only 12.5 Tones, which is smaller than 13.2 Tones reported before.

an english source will be helpful.jst because it is being mass produced doesnt mean it was on that perticular aircraft pictures u posted,i want a source saying that the WS10a is being used for all coming j11b's and the older ones which used al 31'swill be replaced by this engine

 

[redragon]

an english source will be helpful.jst because it is being mass produced doesnt mean it was on that perticular aircraft pictures u posted,i want a source saying that the WS10a is being used for all coming j11b's and the older ones which used al 31'swill be replaced by this engine

Those pics have been studied thousands times in Chinese Defence forum, and fans of PLA in China very clear about how to tell which is WS-10A. It's wasting time to argue the engines showing on those pics are not WS-10A. China now for sure is 1 of the only 3 countries which can design and produce powerful engine like that, given a bit more time China can produce better products which will have some original ideas on, just like what it has done on so many other products, the most famous example is high speed railway system.

 

[aimarraul]

China's J-11BS powered by WS-10A engines

PLAN received the first batch of J11B

 

[Armand2REP]

China's J-11BS powered by WS-10A engines

I see a bunch of engine-less planes in the background.

 

[niceguy2011]

I see a bunch of engine-less planes in the background.

And u can't see those engines on the jet.LOL

 

[Armand2REP]

And u can't see those engines on the jet.LOL

Hard to see what isn't there. The jet in the foreground is the experiment.