Scientists make iron & aluminium transparent

Kunal Biswas

Member of the Year 2011
Ambassador
Joined
May 26, 2010
Messages
31,122
Likes
41,042
08.02.2012

For the first time, an experiment shows that atomic nuclei can become transparent

At the high-brilliance synchrotron light source PETRA III, a team of DESY scientists headed by Dr. Ralf Röhlsberger has succeeded in making atomic nuclei transparent with the help of X-ray light. At the same time they have also discovered a new way to realize an optically controlled light switch that can be used to manipulate light with light, an important ingredient for efficient future quantum computers.

The research results are presented in the current edition of the scientific journal "Nature" (DOI: 10.1038/nature10741).


Multiple images of two objects located between two parallel mirrors illustrate the principle of electromagnetically induced transparency of atomic nuclei: The interaction of x-rays with two layers of iron within such a system of mirrors (an optical resonator) leads to a quantum mechanical superposition state of iron and its mirror images that causes the iron atomic nuclei to appear transparent.
The effect of electromagnetically induced transparency (EIT) is well known from laser physics. With intense laser light of a certain wavelength it is possible to make a non-transparent material transparent for light of another wavelength. This effect is generated by a complex interaction of light with the atomic electron shell. At DESY's X-ray source PETRA III, the Helmholtz research team of Röhlsberger managed to prove for the first time that this transparency effect also exists for X-ray light, when the X-rays are directed towards atomic nuclei of the Mössbauer isotope iron-57 (which makes up 2% of naturally occurring iron). Quite remarkably, only very low light intensities are needed to observe this effect, in contrast to standard EIT experiments.

How does the experiment work?

The scientists positioned two thin layers of iron-57 atoms in an optical cavity, an arrangement of two parallel platinum mirrors that reflect X-ray light multiple times. The two layers of iron-57 atoms, each approximately three nanometres thick, are precisely kept in position between the two platinum mirrors by carbon, which is transparent for X-ray light of the wavelength used. This kind of sandwich with a total thickness of only 50 nanometres is irradiated under very shallow angles with an extremely thin X-ray beam from the PETRA III synchrotron light source. Within this mirror system, the light is reflected back and forth several times, generating a standing wave, a so-called resonance. When the light wavelength and the distance between both iron layers are just right in proportion, the scientists can see that the iron becomes almost transparent for the X-ray light. In order for this effect to occur, one iron layer must be located exactly in the minimum (node) of the light resonance, the other one exactly in the maximum. When the layers are shifted within the cavity, the system immediately becomes non-transparent.

The scientists attribute this observation to a quantum-optical effect, caused by the interaction of atoms in the iron layers. Unlike single atoms, the atoms in an optical cavity together absorb and radiate in synchrony. In the geometry of this experiment their oscillations mutually cancel each other, as a result of which the system appears to be transparent. In contrast to previous experiments in the optical regime, only few light quanta are necessary to generate this effect.

"Our result of achieving transparency of atomic nuclei is virtually the EIT effect in the atomic nucleus," Röhlsberger describes the experiments. "Undoubtedly, there is still a long way to go until the first quantum light computer becomes reality. However, with this effect, we are able to perform a completely new class of quantum-optical experiments of highest sensitivity. With the European XFEL X-ray laser, currently being built in Hamburg, there is a real chance to control X-ray light with X-ray light."

This experiment definitely means considerable technical progress for quantum computing: apart from the basic possibility to make materials transparent with light, the intensity of light is decisive for a future technical realisation as well. Every additional quantum of light produces additional waste heat; this would be reduced by the use of the presently discovered effect.

For the continuation of these experiments and the optimal utilisation of the extremely small X-ray beam size of the highly brilliant X-ray source PETRA III, a new coating facility will be installed at DESY for the production and optimisation of these optical cavities.

The experiments of the DESY scientists also showed another parallel to the EIT effect: the light trapped in the optical cavity only travels with the speed of a few metres per second – normally it is nearly 300 000 kilometres per second. With further experiments, the scientists will clarify how slow the light really becomes under these circumstances, and whether it is possible to use this effect scientifically. A possible application and at the same time an important building block on the way to light-quantum computers is, for example, the storage of information with extremely slow or even stopped light pulses.

http://www.desy.de/information__serv...=2304&lang=eng
 

Kunal Biswas

Member of the Year 2011
Ambassador
Joined
May 26, 2010
Messages
31,122
Likes
41,042
Transparent aluminium is 'new state of matter'


July 27th, 2009
PhysOrg.com

Oxford scientists have created a transparent form of aluminium by bombarding the metal with the world's most powerful soft X-ray laser.

'Transparent aluminium' previously only existed in science fiction, featuring in the movie Star Trek IV, but the real material is an exotic new state of matter with implications for planetary science and nuclear fusion.


In this week's Nature Physics an international team, led by Oxford University scientists, report that a short pulse from the FLASH laser 'knocked out' a core electron from every aluminium atom in a sample without disrupting the metal's crystalline structure. This turned the aluminium nearly invisible to extreme ultraviolet radiation.

''What we have created is a completely new state of matter nobody has seen before,' said Professor Justin Wark of Oxford University's Department of Physics, one of the authors of the paper. 'Transparent aluminium is just the start.

The physical properties of the matter we are creating are relevant to the conditions inside large planets, and we also hope that by studying it we can gain a greater understanding of what is going on during the creation of 'miniature stars' created by high-power laser implosions, which may one day allow the power of nuclear fusion to be harnessed here on Earth.'

The discovery was made possible with the development of a new source of radiation that is ten billion times brighter than any synchrotron in the world (such as the UK's Diamond Light Source).

The FLASH laser, based in Hamburg, Germany, produces extremely brief pulses of soft X-ray light, each of which is more powerful than the output of a power plant that provides electricity to a whole city.


The Oxford team, along with their international colleagues, focused all this power down into a spot with a diameter less than a twentieth of the width of a human hair. At such high intensities the aluminium turned transparent.

Whilst the invisible effect lasted for only an extremely brief period - an estimated 40 femtoseconds - it demonstrates that such an exotic state of matter can be created using very high power X-ray sources.

Professor Wark added: 'What is particularly remarkable about our experiment is that we have turned ordinary aluminium into this exotic new material in a single step by using this very powerful laser.

For a brief period the sample looks and behaves in every way like a new form of matter. In certain respects, the way it reacts is as though we had changed every aluminium atom into silicon: it's almost as surprising as finding that you can turn lead into gold with light!'


The researchers believe that the new approach is an ideal way to create and study such exotic states of matter and will lead to further work relevant to areas as diverse as planetary science, astrophysics and nuclear fusion power.

A report of the research, 'Turning solid aluminium transparent by intense soft X-ray photoionization', is published in Nature Physics.

The research was carried out by an international team led by Oxford University scientists Professor Justin Wark, Dr Bob Nagler, Dr Gianluca Gregori, William Murphy, Sam Vinko and Thomas Whitcher.

Transparent aluminium is 'new state of matter'





Experimental set-up at the FLASH
laser used to discover the new state
of matter.
 

Latest Replies

Global Defence

New threads

Articles

Top