Indian Made Life Saving Infrastructure For Infantry

Discussion in 'Indian Army' started by Kunal Biswas, Dec 11, 2014.

  1. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    mikhail, pmaitra and Srinivas_K like this.
  2.  
  3. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Bullet Proof Sentry Post

    [​IMG]

    Material (BP Steel) :

    BP Steel is test and approved by TBRL Chandigarh under Ministry of Defence Lab or any other international Lab. BP Steel plate should be heat treated to develop maximum resistance to penetration. The tenderer should be submit the BP Steel manufacturer material test report of each plate with the mentioning of plate number and lot number

    ============

    Protection Level

    Each Plate is able to provide following protection Level-
    1) 7.62 x 51mm (SLR) distance from 10 meters.
    2) 7.62 x 39mm (AK-47) distance from 10 meters.
    3) Splinter of Grenade No. 36 HE from 10 meters.

    =============

    Weight of Sentry Post

    Weight approx 350kgs ± 5kgs with Roof.


    =============

    Source : Welcome to Secure Mobile (India)
     
  4. sesha_maruthi27

    sesha_maruthi27 Senior Member Senior Member

    Joined:
    Aug 15, 2010
    Messages:
    3,884
    Likes Received:
    1,568
    Location:
    Hyderabad, Andhra Pradesh(INDIA)
    They have to deploy them soon.
     
  5. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Bullet Proof Morcha

    [​IMG]

    [​IMG]

    The Bullet Proof Morcha consists of three plates joined together with hinges. It can be used as picket for Sentry. Specially in the area of insurgency where the terrorist activities are more. It can be erected or dismantled in a very short period. The B.P. Steel Morcha replaces the Sand Bags.

    =========

    1. It shall have Three firing slots, One on each plate and firing is done in couching position.

    2. It shall have provided with two handles (One top and one bottom on each three plates) to carry and erect.

    3. Easy to erect and dismantle i.e. approx one minute total.

    4. Protection level- All plates against 7.62 x 51mm SLR – Nato Ball Ammunition and AK-47 & 56, 7.62 x 39mm Imported Ammunition as per NIJ standard Level – III 0108.01 at 90o from a distance of 10 meters.

    5. While installation at site each plate must have the provision to joint together with the help of strong hinges, which shall be riveted / bolted instead of welding for easy assembling and dismantling.

    6. Bullet Proof Morcha made from single plates without any kind of Joints or welding.

    7. There shall be no gap between the sheets / plates in assembled condition of BP Morcha.

    =========

    Weight of Morcha

    Weight approx 150kgs ± 5kgs.

    =========

    Material (BP Steel)

    Our BP Steel is test and approved by TBRL Chandigarh under Ministry of Defence Lab or any other international Lab. BP Steel plate shall be heat treated to develop maximum resistance to penetration. We shall submit the BP Steel manufacturer material test report of each plate with the mentioning of plate number and lot number.

    =========

    Wheels

    We shall provide the provision of wheels in this morcha, if required.

    =========

    Source : Welcome to Secure Mobile (India)
     
  6. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Bullet Proof Watch Towers

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Material (BP Steel) :

    BP Steel is test and approved by TBRL Chandigarh under Ministry of Defence Lab or any other international Lab. BP Steel plate should be heat treated to develop maximum resistance to penetration. The tenderer should be submit the BP Steel manufacturer material test report of each plate with the mentioning of plate number and lot number

    ============

    Protection Level

    Each Plate is able to provide following protection Level-
    1) 7.62 x 51mm (SLR) distance from 10 meters.
    2) 7.62 x 39mm (AK-47) distance from 10 meters.
    3) Splinter of Grenade No. 36 HE from 10 meters.

    ============

    Height

    Can be at user demands

    ============

    Source : Welcome to Secure Mobile (India)
     
  7. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Bullet Proof Guard Room

    [​IMG]

    [​IMG]

    Material (BP Steel) :

    BP Steel is test and approved by TBRL Chandigarh under Ministry of Defence Lab or any other international Lab. BP Steel plate should be heat treated to develop maximum resistance to penetration. The tenderer should be submit the BP Steel manufacturer material test report of each plate with the mentioning of plate number and lot number

    ============

    Protection Level

    Each Plate is able to provide following protection Level-
    1) 7.62 x 51mm (SLR) distance from 10 meters.
    2) 7.62 x 39mm (AK-47) distance from 10 meters.
    3) Splinter of Grenade No. 36 HE from 10 meters.

    ============

    Source : Welcome to Secure Mobile (India)
     
    sesha_maruthi27 and pmaitra like this.
  8. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Bullet Proof Sentry Post

    [​IMG]

    Bullet Proof Steel Used : Laggar Steel Bullet Proof Steel, (The bullet proof security post consist of 3 plates joined together with hinges).
    Threat Level Protection : Against SLR 7.62 / AK-47
    Bullet Proof Steel Thickness : 6 mm/5 mm
    Bullet Proof Glass Thickness : 50mm / 35mm
    Utility : It can be used as pickets in sentry specially in the area of insurgency where the terrorist activities are more.

    Source : Bullet Proof Glass | Bullet Proof Steel Plates | Ballistic Glass
     
    sesha_maruthi27 and pmaitra like this.
  9. Blood+

    Blood+ Regular Member

    Joined:
    Jul 8, 2011
    Messages:
    381
    Likes Received:
    120
    Well,these may be good against assault rifle ammunition but what if they are stuck with UBGL rounds or worse,RPGs or any indirect fire weapons??
     
  10. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Mobile guard shelter (Morcha)

    [​IMG]

    [​IMG]

    Finished Height: 53"
    Cost Of mobile Guard Shelter: Rs.16500/-
    Gauge of the sheet: 12
    Colour: Street Grey or as per your requirement
    Width Between two sheet: 5"
    Metal Quality: Special quality sheet metal
    Delivery within 45days

    Source : SK Associates | Bullet Proof Morcha | Mobile Guard Safety
     
    sesha_maruthi27 and pmaitra like this.
  11. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    These fortification are against General threads against firearm bullets commonly 7.62m43 and 7.62NATO used widely among terrorists ..

    Priority here, Is to give Regular Grunt very basic fortification for defense that must be flexible and dynamic and better than sand bags based fortification, One can construct heavy concrete post to take on Heavy weapons ..

     
    sesha_maruthi27, pmaitra and Blood+ like this.
  12. DingDong

    DingDong Senior Member Senior Member

    Joined:
    Oct 24, 2014
    Messages:
    2,226
    Likes Received:
    3,658
    Location:
    Delhi
    10 meter is a large distance in urban/populated areas, it should be shrunk to max 3-3.5 meters.
     
  13. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    BULLETPROOF SECURITY GUARD CABIN

    [​IMG]

    1. EXTERIOR LOOKS AS ORDINARY FRP CABIN
    2. INTERIOR COMFORTS LIKE FAN, LIGHT, MOBILE/WALKIE-TALKIE CHARGING POINT
    3. FIRING SLOT WITH PROTECTIVE SLIDING COVER
    4. SIZE, COLOUR, DESIGN AS PER CUSTOMERS REQUIREMENT
    5. MADE AS PER THE PROTECTION LEVEL REQUIRED (LEVEL IIIA/III/IV OR BLAST PROOF)

    Source : BULLETPROOF SECURITY CABIN MUMBAI INDIA. SECURITY GUARD PROTECTION MUMBAI INDIA

    ==================

    Balletic results are same at ranges of 10ms to 1m, At such distance for such firearms consider point blank range ..

     
    mikhail and pmaitra like this.
  14. DingDong

    DingDong Senior Member Senior Member

    Joined:
    Oct 24, 2014
    Messages:
    2,226
    Likes Received:
    3,658
    Location:
    Delhi
    Not in case of AK-47s when switched on Fully Automatic Mode I guess.
     
  15. Kunal Biswas

    Kunal Biswas Member of the Year 2011 Moderator

    Joined:
    May 26, 2010
    Messages:
    27,572
    Likes Received:
    28,343
    Location:
    BHARAT, INDIA, HINDUSTHAN
    Armour tend to deteriorate if rounds fell on same place as before, It same for any Armored plate ..

    AK-47 in full auto is a lesser thread than Insas in burst mode over an Armored plate ..

     
    sesha_maruthi27 likes this.
  16. Ky Loung

    Ky Loung Regular Member

    Joined:
    Jul 14, 2014
    Messages:
    146
    Likes Received:
    81
    Location:
    VA
    Death trap and pretty useless for what it suppose to do.

    Go with sandbegs, 360 degree open view, with a tent roof. Equip it with a light or heavy machinegun, lots of ammo, spot light, and a base warning system. Much cheaper, with better protection, and the ability to customize the guard post.
     
  17. Ray

    Ray The Chairman Defence Professionals Moderator

    Joined:
    Apr 17, 2009
    Messages:
    43,118
    Likes Received:
    23,543
    Location:
    Somewhere
    If the sentry posts have the same stopping power as the standard sandbag reinforced sentry posts, then the innocuous ones that have been displayed above should be used wherein 'a country under siege' mentality is not showcased, leading to a prolonged fear psychosis.

    The only issue is that the terrorists are getting sophisticated and if they use anti-materiel rifles. then the problem takes a new dimension.

    It is the crisis of one producing something to halt the adversary. It works for sometime and then the adversary produces something to beat what is in place.
     
    Last edited: Dec 12, 2014
    Blood+ likes this.
  18. Blood+

    Blood+ Regular Member

    Joined:
    Jul 8, 2011
    Messages:
    381
    Likes Received:
    120

    But the sandbag structures - can they provide protection against anti material rifles??
     
  19. Ray

    Ray The Chairman Defence Professionals Moderator

    Joined:
    Apr 17, 2009
    Messages:
    43,118
    Likes Received:
    23,543
    Location:
    Somewhere
    NO chance.
     
  20. Blood+

    Blood+ Regular Member

    Joined:
    Jul 8, 2011
    Messages:
    381
    Likes Received:
    120
    What if the bags are placed in multiple layers??I mean sand and the bags - both are dirt cheap.
     
  21. Ky Loung

    Ky Loung Regular Member

    Joined:
    Jul 14, 2014
    Messages:
    146
    Likes Received:
    81
    Location:
    VA

    Sandbags depend how deep will stop anti material rifles rounds. At near point range it will stop rifle calibers below six inch of penetration. In fact the closer you are at shooting sandbags the less penetration you get. The bullet is destroy within the sandbag. The faster the bullet the faster the sand tear it apart.

    Sand vs Bullets.
    The Box O' Truth #7 - The Sands O' Truth The Box O' Truth

    If you look at images of Americans troops they use sandbags because it easy to transport and easy to make different type of protective structures. Sandbags are really really good.


    The people that design the guard posted never serve in the military. It a bunch of stupid engineers thinking their design is the best but in reality they are building death traps. As a rule of thumb never buy military products design by engineers with no military experience. Always buy military gears from veterans because they been there and done whatever needed to be done. They know what work and what not.

    Any military veterans can tell if an equipment is design by military veterans for the troops in mind. Or engineers with no military experience at all creating a product look absolute ridiculous for military uses.

    This is what I would change. Cut the guard post cabin in half. Why? Because you want a 360 degree open view of what you're guarding. You want to know where your attackers are coming from. Place a light or heavy machinegun with lot of ammo facing the direction where an attack will most likely come. What's the best way to stop people from shooting you? Kill them right? What the second best way to stop people from shooting you? Suppress them. Put a spotlight so you can see people trying to sneak in at night. Equip it with a base warning system so everybody in the base will know if they are under attack. If there is room use sandbags for additional protection. You can put a simple tent roof if space allow. 101 basic setup.
     
    Last edited: Dec 13, 2014
    Kay and Blood+ like this.

Share This Page